The Collatamp®G implant procedure should be performed by an appropriately trained surgeon under aseptic conditions.
The blister should be aseptically removed from the outer sealed pouch and then, the implant sponge can be taken aseptically from the blister and should be used immediately. Avoid any unsterile handling of the product before or during application to avoid contamination.

• Collatamp®G can be cut to size to fit the area to be treated.
• Place a dry Collatamp®G on the area to be treated, which should be as dry as possible, and light pressure applied for about a few minutes to achieve better adhesion.
• Up to 3 large Collatamp®G sponges (10 × 10 × 0.5 or 5 × 20 × 0.5 cm) can be used, depending on the size of the area requiring haemostasis. However, the patient’s body weight should be taken into account. The number and size of the implants should be selected so that a total dose of 9 mg sulfate per kg body weight is not exceeded.

Please contact us to order your copy